Share

Fault Estimation and Fault-tolerant Control for In-wheel Motor Electric Vehicles

2017 Electric vehicles
Download Fault Estimation and Fault-tolerant Control for In-wheel Motor Electric Vehicles PDF Online Free

Author :
Release : 2017
Genre : Electric vehicles
Kind : eBook
Book Rating : /5 ( reviews)

GET EBOOK


Book Synopsis Fault Estimation and Fault-tolerant Control for In-wheel Motor Electric Vehicles by : Guoguang Zhang

Download or read book Fault Estimation and Fault-tolerant Control for In-wheel Motor Electric Vehicles written by Guoguang Zhang. This book was released on 2017. Available in PDF, EPUB and Kindle. Book excerpt: With the fast development of batteries, sensors, and electric motors in the past decade, the ground vehicles are being increasingly electrified. With more sensors and actuators being equipped, they may suffer from increased possibility of sensor and actuator faults. This dissertation therefore addresses the fault estimation for sensors and actuators as well as fault-tolerant control for one type of electrified ground vehicle, i.e., the in-wheel motor electric vehicle. First, a prototype in-wheel motor electric vehicle is presented and the experimental platform is discussed. Then the problem of sensor fault estimation and reconstruction of contaminated signal is studied. Vehicle yaw rate signal is chosen as the contaminated signal and a robust gain-scheduling observer is proposed accordingly. Second, the steering motor fault estimation approach is developed because steering motor faults always impose a great threat to vehicle stability and safety. Furthermore, fault-type identification is also considered, which can provide detailed information of the type and magnitude of the actuator fault. Last, to deal with actuator fault and recover the faulty vehicle, an active fault-tolerant control system is proposed for in-wheel motor electric vehicles. It uses a baseline controller to accommodate actuator faults and stabilize the faulty vehicle when an actuator fault occurs. Actuator fault is detected and estimated by the fault detection and diagnosis mechanism. After that, a proper reconfigurable controller is switched on to recover the faulty vehicle. The proposed sensor and actuator fault estimation approaches and active fault-tolerant control system have been validated through simulations in CarSim® and/or vehicle experimental tests on an electric vehicle. At the end, future work and directions are given, which may further address the problems discussed in this dissertation.

Robust Integration of Model-Based Fault Estimation and Fault-Tolerant Control

2020-12-11 Technology & Engineering
Download Robust Integration of Model-Based Fault Estimation and Fault-Tolerant Control PDF Online Free

Author :
Release : 2020-12-11
Genre : Technology & Engineering
Kind : eBook
Book Rating : 606/5 ( reviews)

GET EBOOK


Book Synopsis Robust Integration of Model-Based Fault Estimation and Fault-Tolerant Control by : Jianglin Lan

Download or read book Robust Integration of Model-Based Fault Estimation and Fault-Tolerant Control written by Jianglin Lan. This book was released on 2020-12-11. Available in PDF, EPUB and Kindle. Book excerpt: Robust Integration of Model-Based Fault Estimation and Fault-Tolerant Control is a systematic examination of methods used to overcome the inevitable system uncertainties arising when a fault estimation (FE) function and a fault-tolerant controller interact as they are employed together to compensate for system faults and maintain robustly acceptable system performance. It covers the important subject of robust integration of FE and FTC with the aim of guaranteeing closed-loop stability. The reader’s understanding of the theory is supported by the extensive use of tutorial examples, including some MATLAB®-based material available from the Springer website and by industrial-applications-based material. The text is structured into three parts: Part I examines the basic concepts of FE and FTC, providing extensive insight into the importance of and challenges involved in their integration; Part II describes five effective strategies for the integration of FE and FTC: sequential, iterative, simultaneous, adaptive-decoupling, and robust decoupling; and Part III begins to extend the proposed strategies to nonlinear and large-scale systems and covers their application in the fields of renewable energy, robotics and networked systems. The strategies presented are applicable to a broad range of control problems, because in the absence of faults the FE-based FTC naturally reverts to conventional observer-based control. The book is a useful resource for researchers and engineers working in the area of fault-tolerant control systems, and supplementary material for a graduate- or postgraduate-level course on fault diagnosis and FTC. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Diagnosis and Fault-tolerant Control Volume 2

2021-12-29 Computers
Download Diagnosis and Fault-tolerant Control Volume 2 PDF Online Free

Author :
Release : 2021-12-29
Genre : Computers
Kind : eBook
Book Rating : 594/5 ( reviews)

GET EBOOK


Book Synopsis Diagnosis and Fault-tolerant Control Volume 2 by : Vicenc Puig

Download or read book Diagnosis and Fault-tolerant Control Volume 2 written by Vicenc Puig. This book was released on 2021-12-29. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in fault diagnosis and fault-tolerant control of dynamic processes. Its impetus derives from the need for an overview of the challenges of the fault diagnosis technique and sustainable control, especially for those demanding systems that require reliability, availability, maintainability, and safety to ensure efficient operations. Moreover, the need for a high degree of tolerance with respect to possible faults represents a further key point, primarily for complex systems, as modeling and control are inherently challenging, and maintenance is both expensive and safety-critical. Diagnosis and Fault-tolerant Control 2 also presents and compares different fault diagnosis and fault-tolerant schemes, using well established, innovative strategies for modeling the behavior of the dynamic process under investigation. An updated treatise of diagnosis and fault-tolerant control is addressed with the use of essential and advanced methods including signal-based, model-based and data-driven techniques. Another key feature is the application of these methods for dealing with robustness and reliability.

Fault Diagnosis and Fault Tolerant Control of Multiphase Voltage Source Converters for Application in Traction Drives

2014
Download Fault Diagnosis and Fault Tolerant Control of Multiphase Voltage Source Converters for Application in Traction Drives PDF Online Free

Author :
Release : 2014
Genre :
Kind : eBook
Book Rating : /5 ( reviews)

GET EBOOK


Book Synopsis Fault Diagnosis and Fault Tolerant Control of Multiphase Voltage Source Converters for Application in Traction Drives by : Mehdi Salehifar

Download or read book Fault Diagnosis and Fault Tolerant Control of Multiphase Voltage Source Converters for Application in Traction Drives written by Mehdi Salehifar. This book was released on 2014. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing demand for vehicles with less environmental impact and higher fuel efficiency. To meet these requirements, the transportation electrification has been introduced in both academia and industry during last years. Electric vehicle (EV) and hybrid Electric vehicle (HEV) are two practical examples in transportation systems. The typical power train in the EVs consists of three main parts including energy source, power electronics and an electrical motor. Regarding the machine, permanent magnet (PM) motors are the dominant choice for light duty hybrid vehicles in industry due to their higher efficiency and power density. In order to operate the power train, the electrical machine can be supplied and controlled by a voltage source inverter (VSI). The converter is subjected to various fault types. According to the statistics, 38% of faults in a motor drive are due to the power converter. On the other side, the electrical power train should meet a high level of reliability. Multiphase PM machines can meet the reliability requirements due to their fault-tolerant characteristics. The machine can still be operational with faults in multiple phases. Consequently, to realize a multiphase fault-tolerant motor drive, three main concepts should be developed including fault detection (FD), fault isolation and fault-tolerant control. This PhD thesis is therefore focused on FD and fault-tolerant control of a multiphase VSI. To achieve this research goal, the presented FD and control methods of the power converter are thoroughly investigated through literature review. Following that, the operational condition of the multiphase converter supplying the electrical machine is studied. Regarding FD methods in multiphase, three new algorithms are presented in this thesis. These proposed FD methods are also embedded in new fault-tolerant control algorithms. At the first step, a novel model based FD method is proposed to detect multiple open switch faults. This FD method is included in the developed adaptive proportional resonant control algorithm of the power converter. At the second step, two signal based FD methods are proposed. Fault-tolerant control of the power converter with the conventional PI controller is discussed. Furthermore, the theory of SMC is developed. At the last step, finite control set (FCS) model predictive control (MPC) of the five-phase brushless direct current (BLDC) motor is discussed for the first time in this thesis. A simple FD method is derived from the control signals. Inputs to all developed methods are the five-phase currents of the motor. The theory of each method is explained and compared with available methods. To validate the developed theory at each part, FD algorithm is embedded in the fault-tolerant control algorithm. Experimental results are conducted on a five-phase BLDC motor drive. The electrical motor used in the experimental results has an in-wheel outer rotor structure. This motor is suitable for electric vehicles. At the end of each part, the remarkable points and conclusions are presented.

Diagnosis and Fault-Tolerant Control

2013-03-14 Science
Download Diagnosis and Fault-Tolerant Control PDF Online Free

Author :
Release : 2013-03-14
Genre : Science
Kind : eBook
Book Rating : 446/5 ( reviews)

GET EBOOK


Book Synopsis Diagnosis and Fault-Tolerant Control by : Mogens Blanke

Download or read book Diagnosis and Fault-Tolerant Control written by Mogens Blanke. This book was released on 2013-03-14. Available in PDF, EPUB and Kindle. Book excerpt: This book presents model-based analysis and design methods for fault diagnosis and fault-tolerant control. Architectural and structural models are used to analyse the propagation of the fault through the process, test fault detectability and reveal redundancies that can be used to ensure fault tolerance. Case studies demonstrate the methods presented. The second edition includes new material on reconfigurable control, diagnosis of nonlinear systems, and remote diagnosis, plus new examples and updated bibliography.

You may also like...