Share

Towards Autonomous Driving at the Limit of Friction

Download Towards Autonomous Driving at the Limit of Friction PDF Online Free

Author :
Release : 2014
Genre :
Kind : eBook
Book Rating : /5 ( reviews)

GET EBOOK


Book Synopsis Towards Autonomous Driving at the Limit of Friction by : Sirui Song

Download or read book Towards Autonomous Driving at the Limit of Friction written by Sirui Song. This book was released on 2014. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous vehicles have become a reality, many vehicles have implemented some features to allow partial or full autonomy; however, full autonomous driving near the limit of friction still presents many obstacles, especially near the limit of friction. Autonomous test vehicles are expensive to build and maintain, running the vehicles usually requires highly specialized training, and testing can be dangerous. Research has shown that small sized scaled vehicles may be used as an alternative to full size vehicle testing. The first part of this thesis presents the construction of a 1=5th scaled vehicle testbed. This testbed is inexpensive to construct, easy to maintain, and safe to test compared to full size vehicles. In the linear region, the dynamic response of the tires also closely mimics full size tires and the Dugoff tire model. The small sized testbed is therefore an ideal alternative to full size vehicles. The interaction between the road and the tires remains a challenge to estimate, but a requirement for eff ective control. Tire dynamics are highly non-linear, and are dependent on many variables. Tire slip angles are di fficult to estimate without expensive sensors set-up. Many linear and non-linear estimation methods have been developed to tackle this problem, but each having its limitations. The second part of the thesis presents a method for slip angle estimation, and proposes an observer design which integrates a linear component with the Dugoff tire model and a pneumatic trail estimator. This design is fast to operate, and does not require expensive sensors. With the addition of the pneumatic trail block, accurate slip angles can be obtained in the tires linear and saturation regions equally. Controlling near the limit of friction requires consistently accurate tire states, which is di fficult to achieve with slip angles. With the margin of error under a degrees, a slight error in slip angle estimates while operating at the limit of friction may result in loss of control. The final contribution of this thesis proposes a simpli ed feedforward lateral controller based on the concept of Centre of Percussion (COP), and a longitudinal controller that operates based on lateral acceleration. This control scheme avoids using slip angles, but still pushes the vehicle performance to the limit of friction. The architecture is validated in high fi delity simulations.

Autonomous Vehicle Maneuvering at the Limit of Friction

Download Autonomous Vehicle Maneuvering at the Limit of Friction PDF Online Free

Author :
Release : 2020-10-23
Genre : Electronic books
Kind : eBook
Book Rating : 706/5 ( reviews)

GET EBOOK


Book Synopsis Autonomous Vehicle Maneuvering at the Limit of Friction by : Victor Fors

Download or read book Autonomous Vehicle Maneuvering at the Limit of Friction written by Victor Fors. This book was released on 2020-10-23. Available in PDF, EPUB and Kindle. Book excerpt: Without a driver to fall back on, a fully self-driving car needs to be able to handle any situation it can encounter. With the perspective of future safety systems, this research studies autonomous maneuvering at the tire-road friction limit. In these situations, the dynamics is highly nonlinear, and the tire-road parameters are uncertain. To gain insights into the optimal behavior of autonomous safety-critical maneuvers, they are analyzed using optimal control. Since analytical solutions of the studied optimal control problems are intractable, they are solved numerically. An optimization formulation reveals how the optimal behavior is influenced by the total amount of braking. By studying how the optimal trajectory relates to the attainable forces throughout a maneuver, it is found that maximizing the force in a certain direction is important. This is like the analytical solutions obtained for friction-limited particle models in earlier research, and it is shown to result in vehicle behavior close to the optimal also for a more complex model. Based on the insights gained from the optimal behavior, controllers for autonomous safety maneuvers are developed. These controllers are based on using acceleration-vector references obtained from friction-limited particle models. Exploiting that the individual tire forces tend to be close to their friction limits, the desired tire slip angles are determined for a given acceleration-vector reference. This results in controllers capable of operating at the limit of friction at a low computational cost and reduces the number of vehicle parameters used. For straight-line braking, ABS can intervene to reduce the braking distance without prior information about the road friction. Inspired by this, a controller that uses the available actuation according to the least friction necessary to avoid a collision is developed, resulting in autonomous collision avoidance without any estimation of the tire–road friction. Investigating time-optimal lane changes, it is found that a simple friction-limited particle model is insufficient to determine the desired acceleration vector, but including a jerk limit to account for the yaw dynamics is sufficient. To enable a tradeoff between braking and avoidance with a more general obstacle representation, the acceleration-vector reference is computed in a receding-horizon framework. The controllers developed in this thesis show great promise with low computational cost and performance not far from that obtained offline by using numerical optimization when evaluated in high-fidelity simulation.

Friction Potential Estimation for Autonomous Driving

Download Friction Potential Estimation for Autonomous Driving PDF Online Free

Author :
Release : 2022
Genre :
Kind : eBook
Book Rating : 125/5 ( reviews)

GET EBOOK


Book Synopsis Friction Potential Estimation for Autonomous Driving by : Thorsten Lajewski

Download or read book Friction Potential Estimation for Autonomous Driving written by Thorsten Lajewski. This book was released on 2022. Available in PDF, EPUB and Kindle. Book excerpt:

Leveraging Learning for Vehicle Control at the Limits of Handling

Download Leveraging Learning for Vehicle Control at the Limits of Handling PDF Online Free

Author :
Release : 2021
Genre :
Kind : eBook
Book Rating : /5 ( reviews)

GET EBOOK


Book Synopsis Leveraging Learning for Vehicle Control at the Limits of Handling by : Nathan Spielberg

Download or read book Leveraging Learning for Vehicle Control at the Limits of Handling written by Nathan Spielberg. This book was released on 2021. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous vehicles have the capability to revolutionize human mobility and vehicle safety. To prove safe, they must be capable of navigating their environment as well as or better than the best human drivers. The best human drivers can leverage the limits of a vehicle's capabilities to avoid collisions and stabilize the vehicle while sliding on pavement, ice, and snow. Automated vehicles should similarly be capable of navigating safety-critical scenarios when friction is limited, and one large advantage they hold over human drivers is the amount of data they can generate. With self-driving vehicles in the San Francisco Bay Area collecting almost two human lifetimes worth of data just during 2020, this abundance of data holds the key to improving vehicle safety. This dissertation examines how data generated by self-driving vehicles can be used to learn control policies and models to improve vehicle control near the limits of handling. As data collection and vehicle operation near the limits can be expensive, this work uses skilled humans as an inspiration for learning policies because of their incredible data efficiency. This ability is clearly demonstrated in racing where skilled human drivers act to improve their performance after each lap by shifting their braking point to maximize corner entry speed and minimize lap time. Starting from a benchmark feedforward and feedback control architecture already comparable to skilled human drivers, this work directly learns feedforward policies to improve vehicle performance over time. By using an approximate physics-based model of the vehicle, recorded lap data, and the gradient of lap time, this approach improves lap time by almost seven tenths of a second on a nineteen second lap over an initial optimization-based approach for racing. Additionally, this approach generalizes to low-friction driving. While model-based policy search shows improvement over a solely optimization-based approach, model-based policy search is ultimately limited by the vehicle model used. Physics-based models are useful for interpretability and understanding, but fail to make use of the abundance of data self-driving vehicles generate and often do not capture high-order or complex-to-model effects. Additionally, to operate at a vehicle's true limits, precise identification of the vehicle's road-tire friction coefficient is required which is a very difficult task. To overcome the drawbacks of physics-based models, this thesis next examines the ability of neural networks to use vehicle data to learn vehicle dynamics models. These models are capable of not only modeling higher-order and complex effects, but also vehicle motion on high- and low-friction surfaces. Furthermore, these models do so while retaining comparable control performance near the limits to a benchmark physics-based feedforward and feedback control architecture. Though this control approach shows promise in operating near the limits, feedforward and feedback control is ultimately limited in its ability to trade of small errors in the short term to prevent larger errors in the future. Additionally, actuator and road boundary constraints play an increasingly important role in safety as the vehicle nears the limits. To deal with these limitations, this work presents neural network model predictive control for automated driving near the limits of friction. Neural network model predictive control not only leverages the neural network model's ability to predict dynamics on high- and low-friction test tracks, but also retains comparable or better performance to MPC using a well-tuned physics model optimized to the corresponding high- or low-friction test track. While neural network MPC shows improved performance over physics-based MPC when operating near the limits, MPC leverages its dynamics model with complete certainty. These effects can lead to MPC overleveraging its dynamics model, which in the presence of model mismatch can lead to poor controller performance. Additionally, when using neural network models in MPC, the network predicts vehicle motion with complete certainty regardless of the presence or absence of training data in the corresponding modeled region. To mitigate this issue, this work presents an approach which leverages a neural network model to learn the uncertainty in the underlying dynamics model used in MPC. By learning the uncertainty in MPC's dynamics model, the vehicle can take actions to avoid highly uncertain regions of operation while still attempting to optimize the original MPC cost function. The insights from this work can be used to design automated vehicles capable of leveraging vehicle data to more effectively operate near the limits of handling.

Optimal Braking Patterns and Forces in Autonomous Safety-Critical Maneuvers

Download Optimal Braking Patterns and Forces in Autonomous Safety-Critical Maneuvers PDF Online Free

Author :
Release : 2019-05-02
Genre :
Kind : eBook
Book Rating : 012/5 ( reviews)

GET EBOOK


Book Synopsis Optimal Braking Patterns and Forces in Autonomous Safety-Critical Maneuvers by : Victor Fors

Download or read book Optimal Braking Patterns and Forces in Autonomous Safety-Critical Maneuvers written by Victor Fors. This book was released on 2019-05-02. Available in PDF, EPUB and Kindle. Book excerpt: The trend of more advanced driver-assistance features and the development toward autonomous vehicles enable new possibilities in the area of active safety. With more information available in the vehicle about the surrounding traffic and the road ahead, there is the possibility of improved active-safety systems that make use of this information for stability control in safety-critical maneuvers. Such a system could adaptively make a trade-off between controlling the longitudinal, lateral, and rotational dynamics of the vehicle in such a way that the risk of collision is minimized. To support this development, the main aim of this licentiate thesis is to provide new insights into the optimal behavior for autonomous vehicles in safety-critical situations. The knowledge gained have the potential to be used in future vehicle control systems, which can perform maneuvers at-the-limit of vehicle capabilities. Stability control of a vehicle in autonomous safety-critical at-the-limit maneuvers is analyzed by the use of optimal control. Since analytical solutions of the studied optimal control problems are intractable, they are discretized and solved numerically. A formulation of an optimization criterion depending on a single interpolation parameter is introduced, which results in a continuous family of optimal coordinated steering and braking patterns. This formulation provides several new insights into the relation between different braking patterns for vehicles in at-the-limit maneuvers. The braking patterns bridge the gap between optimal lane-keeping control and optimal yaw control, and have the potential to be used for future active-safety systems that can adapt the level of braking to the situation at hand. A new illustration named attainable force volumes is introduced, which effectively shows how the trajectory of a vehicle maneuver relates to the attainable forces over the duration of the maneuver. It is shown that the optimal behavior develops on the boundary surface of the attainable force volume. Applied to lane-keeping control, this indicates a set of control principles similar to those analytically obtained for friction-limited particle models in earlier research, but is shown to result in vehicle behavior close to the globally optimal solution also for more complex models and scenarios.

You may also like...