Author : C. L. Berger & Sons
Release : 2013-09
Genre :
Kind : eBook
Book Rating : 027/5 ( reviews)

GET EBOOK

Book Synopsis Handbook and Catalog, Engineering, Surveying and Mining Instruments by : C. L. Berger & Sons

Download or read book Handbook and Catalog, Engineering, Surveying and Mining Instruments written by C. L. Berger & Sons. This book was released on 2013-09. Available in PDF, EPUB and Kindle. Book excerpt: This historic book may have numerous typos and missing text. Purchasers can usually download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1922 edition. Excerpt: ...horizontal wire coincides with the mark and then clamp the side-telescope to its hub. The telescopes are now set to correspond with thg zero of the vertical circle. To place the telescopes at an angle with each other. Level up and fix a mark when the main telescope is level. Then raise or depress the main telescope the required angle and clamp the horizontal axis. Now move the side-telescope until its horizontal wire bisects the mark and clamp it firmly to its hub. During an extended operation with the side-telescope, the relative position of the two telescopes should be verified from time to time to detect any disturbance of the side-telescope. Tm_nsits having the telescope mounted at the end of the horizontal axis of revolution are sometimes used in mines; or, as shown in the Alt.-Azimuths Nos. 15a and 15b, this construction is used in some instruments for geodetic and smaller astronomical work. The adjustment of such a telescope for collimation may therefore be explained in this connection. The following method is as simple as any: --. Select a well-defined object, as a church-spire, distant at least 5 or 6 miles. The..1strument being leveled, bisect the object with the vertical wire and read the verniers of the horizontal limb. Then turn the vernier plate so as to read exactly 180 different from the previous reading, and revolve the telescope. If the vertical wire is adjusted for collimation it will again bisect the distant object, since the space covered by the cross-wires on an object at such a distance will be much greater than the change in the position of the telescope as caused by its excentricity from the center of the instrument. If it does not again bisect the object, correct one-half the error by means of the hon zontal..