Share

Design, Simulation and Applications of Inductors and Transformers for Si RF ICs

2005-12-15 Technology & Engineering
Download Design, Simulation and Applications of Inductors and Transformers for Si RF ICs PDF Online Free

Author :
Release : 2005-12-15
Genre : Technology & Engineering
Kind : eBook
Book Rating : 381/5 ( reviews)

GET EBOOK


Book Synopsis Design, Simulation and Applications of Inductors and Transformers for Si RF ICs by : Ali M. Niknejad

Download or read book Design, Simulation and Applications of Inductors and Transformers for Si RF ICs written by Ali M. Niknejad. This book was released on 2005-12-15. Available in PDF, EPUB and Kindle. Book excerpt: The modern wireless communication industry has put great demands on circuit designers for smaller, cheaper transceivers in the gigahertz frequency range. One tool which has assisted designers in satisfying these requirements is the use of on-chip inductiveelements (inductors and transformers) in silicon (Si) radio-frequency (RF) integrated circuits (ICs). These elements allow greatly improved levels of performance in Si monolithic low-noise amplifiers, power amplifiers, up-conversion and down-conversion mixers and local oscillators. Inductors can be used to improve the intermodulation distortion performance and noise figure of small-signal amplifiers and mixers. In addition, the gain of amplifier stages can be enhanced and the realization of low-cost on-chip local oscillators with good phase noise characteristics is made feasible. In order to reap these benefits, it is essential that the IC designer be able to predict and optimize the characteristics of on-chip inductiveelements. Accurate knowledge of inductance values, quality factor (Q) and the influence of ad- cent elements (on-chip proximity effects) and substrate losses is essential. In this book the analysis, modeling and application of on-chip inductive elements is considered. Using analyses based on Maxwells equations, an accurate and efficient technique is developed to model these elements over a wide frequency range. Energy loss to the conductive substrate is modeled through several mechanisms, including electrically induced displacement and conductive c- rents and by magnetically induced eddy currents. These techniques have been compiled in a user-friendly software tool ASITIC (Analysis and Simulation of Inductors and Transformers for Integrated Circuits).

Integrated Inductors and Transformers

2010-11-15 Computers
Download Integrated Inductors and Transformers PDF Online Free

Author :
Release : 2010-11-15
Genre : Computers
Kind : eBook
Book Rating : 459/5 ( reviews)

GET EBOOK


Book Synopsis Integrated Inductors and Transformers by : Egidio Ragonese

Download or read book Integrated Inductors and Transformers written by Egidio Ragonese. This book was released on 2010-11-15. Available in PDF, EPUB and Kindle. Book excerpt: With the ability to improve performance, reduce fabrication costs, and increase integration levels of both RX and TX sections of the RF/mm-wave front-end, passive inductive components have experienced extraordinary growth in ICs. Therefore, a fundamental understanding of monolithic inductors and transformers has become essential for all process eng

Design, Simulation and Applications of Inductors and Transformers for Si RF ICs

2000-10-31 Technology & Engineering
Download Design, Simulation and Applications of Inductors and Transformers for Si RF ICs PDF Online Free

Author :
Release : 2000-10-31
Genre : Technology & Engineering
Kind : eBook
Book Rating : 867/5 ( reviews)

GET EBOOK


Book Synopsis Design, Simulation and Applications of Inductors and Transformers for Si RF ICs by : Ali M. Niknejad

Download or read book Design, Simulation and Applications of Inductors and Transformers for Si RF ICs written by Ali M. Niknejad. This book was released on 2000-10-31. Available in PDF, EPUB and Kindle. Book excerpt: The modern wireless communication industry has put great demands on circuit designers for smaller, cheaper transceivers in the gigahertz frequency range. One tool which has assisted designers in satisfying these requirements is the use of on-chip inductiveelements (inductors and transformers) in silicon (Si) radio-frequency (RF) integrated circuits (ICs). These elements allow greatly improved levels of performance in Si monolithic low-noise amplifiers, power amplifiers, up-conversion and down-conversion mixers and local oscillators. Inductors can be used to improve the intermodulation distortion performance and noise figure of small-signal amplifiers and mixers. In addition, the gain of amplifier stages can be enhanced and the realization of low-cost on-chip local oscillators with good phase noise characteristics is made feasible. In order to reap these benefits, it is essential that the IC designer be able to predict and optimize the characteristics of on-chip inductiveelements. Accurate knowledge of inductance values, quality factor (Q) and the influence of ad- cent elements (on-chip proximity effects) and substrate losses is essential. In this book the analysis, modeling and application of on-chip inductive elements is considered. Using analyses based on Maxwells equations, an accurate and efficient technique is developed to model these elements over a wide frequency range. Energy loss to the conductive substrate is modeled through several mechanisms, including electrically induced displacement and conductive c- rents and by magnetically induced eddy currents. These techniques have been compiled in a user-friendly software tool ASITIC (Analysis and Simulation of Inductors and Transformers for Integrated Circuits).

Microwave Circuit Design Using Linear and Nonlinear Techniques

2005-10-03 Technology & Engineering
Download Microwave Circuit Design Using Linear and Nonlinear Techniques PDF Online Free

Author :
Release : 2005-10-03
Genre : Technology & Engineering
Kind : eBook
Book Rating : 824/5 ( reviews)

GET EBOOK


Book Synopsis Microwave Circuit Design Using Linear and Nonlinear Techniques by : George D. Vendelin

Download or read book Microwave Circuit Design Using Linear and Nonlinear Techniques written by George D. Vendelin. This book was released on 2005-10-03. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate handbook on microwave circuit design with CAD. Full of tips and insights from seasoned industry veterans, Microwave Circuit Design offers practical, proven advice on improving the design quality of microwave passive and active circuits-while cutting costs and time. Covering all levels of microwave circuit design from the elementary to the very advanced, the book systematically presents computer-aided methods for linear and nonlinear designs used in the design and manufacture of microwave amplifiers, oscillators, and mixers. Using the newest CAD tools, the book shows how to design transistor and diode circuits, and also details CAD's usefulness in microwave integrated circuit (MIC) and monolithic microwave integrated circuit (MMIC) technology. Applications of nonlinear SPICE programs, now available for microwave CAD, are described. State-of-the-art coverage includes microwave transistors (HEMTs, MODFETs, MESFETs, HBTs, and more), high-power amplifier design, oscillator design including feedback topologies, phase noise and examples, and more. The techniques presented are illustrated with several MMIC designs, including a wideband amplifier, a low-noise amplifier, and an MMIC mixer. This unique, one-stop handbook also features a major case study of an actual anticollision radar transceiver, which is compared in detail against CAD predictions; examples of actual circuit designs with photographs of completed circuits; and tables of design formulae.

Silicon Heterostructure Handbook

2018-10-03 Technology & Engineering
Download Silicon Heterostructure Handbook PDF Online Free

Author :
Release : 2018-10-03
Genre : Technology & Engineering
Kind : eBook
Book Rating : 585/5 ( reviews)

GET EBOOK


Book Synopsis Silicon Heterostructure Handbook by : John D. Cressler

Download or read book Silicon Heterostructure Handbook written by John D. Cressler. This book was released on 2018-10-03. Available in PDF, EPUB and Kindle. Book excerpt: An extraordinary combination of material science, manufacturing processes, and innovative thinking spurred the development of SiGe heterojunction devices that offer a wide array of functions, unprecedented levels of performance, and low manufacturing costs. While there are many books on specific aspects of Si heterostructures, the Silicon Heterostructure Handbook: Materials, Fabrication, Devices, Circuits, and Applications of SiGe and Si Strained-Layer Epitaxy is the first book to bring all aspects together in a single source. Featuring broad, comprehensive, and in-depth discussion, this handbook distills the current state of the field in areas ranging from materials to fabrication, devices, CAD, circuits, and applications. The editor includes "snapshots" of the industrial state-of-the-art for devices and circuits, presenting a novel perspective for comparing the present status with future directions in the field. With each chapter contributed by expert authors from leading industrial and research institutions worldwide, the book is unequalled not only in breadth of scope, but also in depth of coverage, timeliness of results, and authority of references. It also includes a foreword by Dr. Bernard S. Meyerson, a pioneer in SiGe technology. Containing nearly 1000 figures along with valuable appendices, the Silicon Heterostructure Handbook authoritatively surveys materials, fabrication, device physics, transistor optimization, optoelectronics components, measurement, compact modeling, circuit design, and device simulation.

You may also like...